|
Step
by step tying sequence
on half-inch tube of "Long range" type
By Jurij
Shumakov
Page 3.
The tying
sequence continues.
15.
Apply a few strips of the desired flashy material over the wing
section. In our case it is Midge Crystal hair.
16.
Apply the second hackle using same method as the first one. Sometimes,
in case of complicated front hackle, second hackle is applied over the
first one. It helps to build very compact multi-colored front hackle.
17.
Prepare and apply the second section of the wing very tightly to the
second hackle. Make it longer than first one by about 1-2 cm. Remember
that fixing the section of the wing on the necked plastic leads to the
loss of the section or whole wing. Don't forget to apply tying thread
as the base before tying hair section.
18.
Remove excess hair with scalpel.
19.
Apply desired flashy material.
20. Apply
third front hackle.
21.
Prepare and apply third section of the wing very tightly to the third
hackle.
22.
Remove excess hair with scalpel.
Article
continues on page 4
Text and
photo by Jurij Shumakov 2005
|
